1. Description
The product is specially designed for laser tube cutting equipment. The production itself can be used as an independent rotating spindle, with a chuck that can firmly clamp the work-piece while rotating.
The product outputs by using a cylinder directly, the mechanical efficiency is high, the energy loss is small, the output clamping force is large, and the clamping force is stable. Because the cylinder is used to clamp the work-piece directly, the working range is wide. The cylinder is used for outputting directly, the output force and the air pressure are in linear proportion, which makes it easy to achieve software control.
This kind of chuck is made in a square middle hole. It increases the size of square tube and expands the scope of use. And the structure of this chuck is very simple and has fewer components, compared with other types of chucks. But it has stable performance and low energy consumption.
2. Performance Parameters
| Model number | G800JF-360 |
| Claw stroke | 180mm |
| Maximunm clamping force | 4.5KN |
| Allowable pressure | 0.4-0.9MPa |
| Limit speed | 500r/min |
| Clamping range | 5-360mm |
| Central height | 420mm |
| Rotational inertia | 17.19g.m2 |
| Rotating part weight | 303kg |
| Whole unit weight | 452kg |
3.Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | K | L | O | R | S |
| G800JF-360 | 680 | 420 | 820 | 840 | 205 | 150 | 620 | 257 | 510 | 523 | 539 | 25 | 360 | 9 | 16-M8 | 18 |
4.Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5.Production Line
